High-performance thermal cameras
Discover cutting-edge thermal imaging technology today
Thermal Vision
BRESSER TNS3 Wi-Fi thermal imaging camera
€1,599.00*
Ideal for hunting or locating leakages, the BRESSER TNS3 Wi-Fi thermal imaging camera can detect even the slightest difference in temperature and display the results on its 1280x960 pixel display. The thermal monocular is equipped with a sensitive 384x288 thermal imaging sensor as well as a digital 2x and 4x zoom. Images can be focused via the focusable objective and the dioptre compensation, which has a range of -4 to +5. The camera also features a practical recording function, which you can use to record your findings or capture photos and videos of interesting objects. In addition, the thermal imaging monocular comes with a premium chest pouch so that you can store and carry it safely and retrieve it quickly and quietly when you spot something interesting.
PI technology and hot tracking
The thermal imaging camera comes with cutting-edge PI technology, which uses special software to render sharp, detailed images so that you can identify objects with ease. There is also a practical hot tracking mode, which automatically highlights the warmest object.
Detection range
Featuring an NETD value of 40 mK, the infrared thermal imaging sensor enables you to detect objects from far away. For example, you can detect wild boar at a range of up to 1000 metres, even in complete darkness.
Six different colour palettes
Different scenarios present different challenges in terms of image rendering. For this reason, the TNS3 thermal imaging camera offers a total of six different colour palettes to choose from: Rainbow, red-hot, white-hot, black-hot, wildlife observation mode, and yellow hue.
High frame rate
The Wi-Fi thermal imaging camera has a frame rate of 50 Hz, allowing you to observe moving objects in crystal-clear quality.
Long battery life
The thermal imaging camera comes with a built-in rechargeable battery, which lasts for up to 6 hours after a full charge.
Applications
The TNS3 thermal imaging camera is particularly suitable for wildlife observations and hunting expeditions. However, it is also very useful in other scenarios involving sources of heat. For example, it can be used to locate geothermal heat sources and thermal leaks in homes and apartments.
Discover the BRESSER TNS3 Wi-Fi thermal imaging camera – the perfect companion for hunting expeditions or building diagnostics.
FEATURES
Premium thermal imaging camera
384x288 infrared thermal imaging sensor
NETD value: 40 mK
Adjustable lens with focus mode
Digital zoom: 2x, 4x
Focal length: 35 mm
6 modes for application-specific display: Rainbow, red-hot, white-hot, black-hot, wildlife observation mode, yellow hue
PI technology for detailed and sharp images
Hot tracking function for identifying the warmest object
Recording function for photos and videos, take photos directly or via Wi-Fi function and app
Saves images in BMP format
Frame rate of thermal images: 50 Hz
Detection range:
Wild boar: up to 1000 m
Vehicles: up to 2000 m
Wi-Fi function and app
Dioptre compensation: -4 to +5
USB-C port for data transfer
Built-in rechargeable battery
Battery life: At least 6 hours of continuous use
Built-in 16 GB memory
Includes lens cap and premium transport case for quick, comfortable and quiet removal/storageFOV: 10.7° x 8°Focal length: 35 mm
PACKAGE CONTENTS
BRESSER TNS3 Thermal imaging camera
USB cable
Power adapter (for use with USB cable)
Premium transport case
Instruction manual
Currently not available
Präzise Jagen Eyepiece for Duo Connector with 2.5 Magnification
€199.00*
Eyepiece with 2.5 MagnificationOur eyepiece connects directly to the DUO connector via the integrated interface, enhancing your attachment device with a two-and-a-half times magnification. This allows for precise targeting of game even at greater distances without any issues. The total length of the eyepiece, including the eyecup, is 10.5 cm. Additionally, the eyepiece is compatible with the small closure cap. FEATURES2.5 magnification for precise targeting at greater distancesDirect coupling to the DUO connectorTotal length including eyecup: 10.5 cmCompatible with the small closure capRobust and durable constructionSCOPE OF DELIVERY1x Eyepiece with 2.5 magnification
Currently not available
Präzise Jagen Fusion Adapter for Alpen APEX LT 2–12x44 Gen 2
€150.00*
The new Fusion Adapter was specifically developed for the secure and precise mounting of clip-on devices onto the riflescope. Unlike the traditional clamping sleeve, the adapter is not pushed on but screwed directly onto the riflescope and secured using thread clamping. This results in an especially stable and play-free connection between the clip-on device and the optic.
Mounting can be carried out on the APEX LT 2–12x44 Gen 2. Thanks to its compact design, the Fusion Adapter is particularly suitable for combination weapons or setups with very limited space at the objective lens.
A major advantage is the significant weight saving compared to conventional adapter solutions. The reduced weight improves the weapon's balance, facilitates handling, and increases comfort during longer use. At the same time, the adapter is recoil-proof up to 1000G Magnum – making it perfectly suitable even for the most powerful calibres.
The precisely manufactured internal thread ensures exact alignment of the adapter on the riflescope. The integrated bayonet on the front guarantees absolutely repeatable positioning with each attachment and removal.
The Fusion Adapter is made from high-quality aluminium, which is reliably protected against corrosion and wear by a hard anodised coating. This combines maximum stability with a modern, lightweight design.
Advantages at a glance:
Screw-on system instead of clamping → extremely stable connection Significant weight saving for improved balance and handling Also ideal where space at the objective is limited (e.g. combination weapons) Recoil-proof up to 1000G Magnum Exact alignment and repeatable mounting through precision internal thread & bayonet Robust, corrosion-protected aluminium construction
We explicitly point out that a clip-on device may only be mounted on a weapon if permitted by the legislation of the respective country. Mounting is carried out at your own risk and responsibility.
FEATURES:
Compatible with APEX LT 2–12x44 Gen 2 Secure thread clamping Stable and play-free connection Compact design Recoil-proof up to 1000G Magnum High-quality aluminium with hard anodised coating
SCOPE OF DELIVERY:
Fusion Adapter User manual
Available
Präzise Jagen Clamping Sleeve 63,5 mm for mounting a clip-on device on a riflescope
€180.00*
The high-quality clamping sleeve has been specially developed for mounting on the riflescope and offers a stable, repeatable base for attaching a clip-on device.
It is simply slid over the objective of the riflescope – for models up to 61 mm objective diameter over a length of 40 mm, for 30 mm to 38 mm clamping sleeves over 35 mm – and securely screwed into place.
The clamping sleeve remains permanently on the riflescope, enabling quick and precise use of the clip-on device at any time.
Integrated protective films on the contact surfaces ensure secure adhesion and prevent damage to the riflescope – even with powerful calibres, the clamping sleeve is reliably held in position.
Thanks to its precise internal contour and the bayonet mount on the front, it guarantees an absolutely repeatable alignment of the clip-on device every time it is mounted.
Made from a single piece of high-quality aluminium and finished with a hard anodised coating, the clamping sleeve is optimally protected against corrosion and wear – ensuring a long service life even under tough hunting conditions.
Note: The use of a clip-on device is only permitted if it complies with the legislation of the respective country.
Mounting is carried out at your own risk.
FEATURES
Precision-fit clamping sleeve for mounting on the riflescope Permanent attachment with secure screw connection Integrated protective films to protect the riflescope and improve grip Precise internal contour for exact alignment of the clip-on device Bayonet mount for repeatable installation Made from high-quality aluminium with a hard anodised coating Corrosion- and wear-resistant
SCOPE OF DELIVERY
Clamping sleeve in the selected version Integrated protective films Installation instructions
Available
Präzise Jagen DUO Connector with M52x0.75 Connection Thread
€95.00*
The DUO connector features an internal thread in various sizes, allowing it to be screwed directly onto the connection thread of the clip-on device.
Thanks to the integrated locking mechanism, unwanted rotation of the clip-on device is reliably prevented – no additional locking nut is required.
The DUO connector is compatible with all sizes of clamping sleeves.
This allows you to use your clip-on device flexibly on any rifle with a clamping sleeve mounted on the riflescope.
The DUO connectors are made from high-quality aluminium and are optimally protected against corrosion and wear by a hard anodised coating – ideal for tough hunting use.
Special versions: Pard FT32: With bayonet interface, installation possible by the customer. Night Spotter Evo: Requires DUO connector M52x0.75 mm and the included spacer ring; if not available, please order item AR-NS. HIKMICRO Thunder TE19C, TH35 and Pro TQ 50C as well as Cheetah: Require DUO connector M52x0.75 mm and an adapter piece; from generation 2.0 with external thread, no adapter piece is required. Pulsar Forward FN455: Requires DUO connector M52x0.75 mm and a spacer ring (please contact sales). Liemke Merlin 13: Thread M30x1, adapter ring to M52 included in the scope of delivery; compatible with our DUO connector DV-M52.
FEATURES
Internal thread in various sizes for direct mounting on the clip-on device Integrated locking mechanism prevents rotation without additional nut Compatible with all sizes of clamping sleeves Flexible use on multiple rifles Made from high-quality aluminium Hard anodised coating for corrosion and wear protection Available for numerous devices such as Pulsar Core, Pard FT32, Night Spotter Evo, HIKMICRO, Pulsar Forward FN455 and Liemke Merlin 13
SCOPE OF DELIVERY
DUO connector in the selected version Installation instructions
Available
Präzise Jagen Clamping Sleeve 64 mm for mounting a clip-on device on a riflescope
€180.00*
The high-quality clamping sleeve has been specially developed for mounting on the riflescope and offers a stable, repeatable base for attaching a clip-on device.
It is simply slid over the objective of the riflescope – for models up to 61 mm objective diameter over a length of 40 mm, for 30 mm to 38 mm clamping sleeves over 35 mm – and securely screwed into place.
The clamping sleeve remains permanently on the riflescope, enabling quick and precise use of the clip-on device at any time.
Integrated protective films on the contact surfaces ensure secure adhesion and prevent damage to the riflescope – even with powerful calibres, the clamping sleeve is reliably held in position.
Thanks to its precise internal contour and the bayonet mount on the front, it guarantees an absolutely repeatable alignment of the clip-on device every time it is mounted.
Made from a single piece of high-quality aluminium and finished with a hard anodised coating, the clamping sleeve is optimally protected against corrosion and wear – ensuring a long service life even under tough hunting conditions.
Note: The use of a clip-on device is only permitted if it complies with the legislation of the respective country.
Mounting is carried out at your own risk.
FEATURES
Precision-fit clamping sleeve for mounting on the riflescope Permanent attachment with secure screw connection Integrated protective films to protect the riflescope and improve grip Precise internal contour for exact alignment of the clip-on device Bayonet mount for repeatable installation Made from high-quality aluminium with a hard anodised coating Corrosion- and wear-resistant
SCOPE OF DELIVERY
Clamping sleeve in the selected version Integrated protective films Installation instructions
Available
Präzise Jagen Clamping Sleeve 51,5 mm for mounting a clip-on device on a riflescope
€180.00*
The high-quality clamping sleeve has been specially developed for mounting on the riflescope and offers a stable, repeatable base for attaching a clip-on device.
It is simply slid over the objective of the riflescope – for models up to 61 mm objective diameter over a length of 40 mm, for 30 mm to 38 mm clamping sleeves over 35 mm – and securely screwed into place.
The clamping sleeve remains permanently on the riflescope, enabling quick and precise use of the clip-on device at any time.
The overall diameter is 65 mm at the locking ring for models with objectives up to 61 mm.
Integrated protective films on the contact surfaces ensure secure adhesion and prevent damage to the riflescope – even with powerful calibres, the clamping sleeve is reliably held in position.
Thanks to its precise internal contour and the bayonet mount on the front, it guarantees an absolutely repeatable alignment of the clip-on device every time it is mounted.
Made from a single piece of high-quality aluminium and finished with a hard anodised coating, the clamping sleeve is optimally protected against corrosion and wear – ensuring a long service life even under tough hunting conditions.
Note: The use of a clip-on device is only permitted if it complies with the legislation of the respective country.
Mounting is carried out at your own risk.
FEATURES
Precision-fit clamping sleeve for mounting on the riflescope Permanent attachment with secure screw connection Integrated protective films to protect the riflescope and improve grip Precise internal contour for exact alignment of the clip-on device Bayonet mount for repeatable installation Made from high-quality aluminium with a hard anodised coating Corrosion- and wear-resistant
SCOPE OF DELIVERY
Clamping sleeve in the selected version Integrated protective films Installation instructions
Available
Präzise Jagen Clamping Sleeve 62 mm for mounting a clip-on device on a riflescope
€180.00*
The high-quality clamping sleeve has been specially developed for mounting on the riflescope and offers a stable, repeatable base for attaching a clip-on device.
It is simply slid over the objective of the riflescope – for models up to 61 mm objective diameter over a length of 40 mm, for 30 mm to 38 mm clamping sleeves over 35 mm – and securely screwed into place.
The clamping sleeve remains permanently on the riflescope, enabling quick and precise use of the clip-on device at any time.
Integrated protective films on the contact surfaces ensure secure adhesion and prevent damage to the riflescope – even with powerful calibres, the clamping sleeve is reliably held in position.
Thanks to its precise internal contour and the bayonet mount on the front, it guarantees an absolutely repeatable alignment of the clip-on device every time it is mounted.
Made from a single piece of high-quality aluminium and finished with a hard anodised coating, the clamping sleeve is optimally protected against corrosion and wear – ensuring a long service life even under tough hunting conditions.
Note: The use of a clip-on device is only permitted if it complies with the legislation of the respective country.
Mounting is carried out at your own risk.
FEATURES
Precision-fit clamping sleeve for mounting on the riflescope Permanent attachment with secure screw connection Integrated protective films to protect the riflescope and improve grip Precise internal contour for exact alignment of the clip-on device Bayonet mount for repeatable installation Made from high-quality aluminium with a hard anodised coating Corrosion- and wear-resistant
SCOPE OF DELIVERY
Clamping sleeve in the selected version Integrated protective films Installation instructions
Available
Präzise Jagen Clamping Sleeve 51 mm for mounting a clip-on device on a riflescope
€180.00*
The high-quality clamping sleeve has been specially developed for mounting on the riflescope and offers a stable, repeatable base for attaching a clip-on device.
It is simply slid over the objective of the riflescope – for models up to 61 mm objective diameter over a length of 40 mm, for 30 mm to 38 mm clamping sleeves over 35 mm – and securely screwed into place.
The clamping sleeve remains permanently on the riflescope, enabling quick and precise use of the clip-on device at any time.
The overall diameter is 65 mm at the locking ring for models with objectives up to 61 mm.
Integrated protective films on the contact surfaces ensure secure adhesion and prevent damage to the riflescope – even with powerful calibres, the clamping sleeve is reliably held in position.
Thanks to its precise internal contour and the bayonet mount on the front, it guarantees an absolutely repeatable alignment of the clip-on device every time it is mounted.
Made from a single piece of high-quality aluminium and finished with a hard anodised coating, the clamping sleeve is optimally protected against corrosion and wear – ensuring a long service life even under tough hunting conditions.
Note: The use of a clip-on device is only permitted if it complies with the legislation of the respective country.
Mounting is carried out at your own risk.
FEATURES
Precision-fit clamping sleeve for mounting on the riflescope Permanent attachment with secure screw connection Integrated protective films to protect the riflescope and improve grip Precise internal contour for exact alignment of the clip-on device Bayonet mount for repeatable installation Made from high-quality aluminium with a hard anodised coating Corrosion- and wear-resistant
SCOPE OF DELIVERY
Clamping sleeve in the selected version Integrated protective films Installation instructions
Currently not available
Präzise Jagen Clamping Sleeve 57 mm for mounting a clip-on device on a riflescope
€180.00*
The high-quality clamping sleeve has been specially developed for mounting on the riflescope and offers a stable, repeatable base for attaching a clip-on device.
It is simply slid over the objective of the riflescope – for models up to 61 mm objective diameter over a length of 40 mm, for 30 mm to 38 mm clamping sleeves over 35 mm – and securely screwed into place.
The clamping sleeve remains permanently on the riflescope, enabling quick and precise use of the clip-on device at any time.
The overall diameter is 65 mm at the locking ring for models with objectives up to 61 mm.
Integrated protective films on the contact surfaces ensure secure adhesion and prevent damage to the riflescope – even with powerful calibres, the clamping sleeve is reliably held in position.
Thanks to its precise internal contour and the bayonet mount on the front, it guarantees an absolutely repeatable alignment of the clip-on device every time it is mounted.
Made from a single piece of high-quality aluminium and finished with a hard anodised coating, the clamping sleeve is optimally protected against corrosion and wear – ensuring a long service life even under tough hunting conditions.
Note: The use of a clip-on device is only permitted if it complies with the legislation of the respective country.
Mounting is carried out at your own risk.
FEATURES
Precision-fit clamping sleeve for mounting on the riflescope Permanent attachment with secure screw connection Integrated protective films to protect the riflescope and improve grip Precise internal contour for exact alignment of the clip-on device Bayonet mount for repeatable installation Made from high-quality aluminium with a hard anodised coating Corrosion- and wear-resistant
SCOPE OF DELIVERY
Clamping sleeve in the selected version Integrated protective films Installation instructions
Currently not available
Präzise Jagen Clamping Sleeve 56 mm for mounting a clip-on device on a riflescope
€180.00*
The high-quality clamping sleeve has been specially developed for mounting on the riflescope and offers a stable, repeatable base for attaching a clip-on device.
It is simply slid over the objective of the riflescope – for models up to 61 mm objective diameter over a length of 40 mm, for 30 mm to 38 mm clamping sleeves over 35 mm – and securely screwed into place.
The clamping sleeve remains permanently on the riflescope, enabling quick and precise use of the clip-on device at any time.
The overall diameter is 65 mm at the locking ring for models with objectives up to 61 mm.
Integrated protective films on the contact surfaces ensure secure adhesion and prevent damage to the riflescope – even with powerful calibres, the clamping sleeve is reliably held in position.
Thanks to its precise internal contour and the bayonet mount on the front, it guarantees an absolutely repeatable alignment of the clip-on device every time it is mounted.
Made from a single piece of high-quality aluminium and finished with a hard anodised coating, the clamping sleeve is optimally protected against corrosion and wear – ensuring a long service life even under tough hunting conditions.
Note: The use of a clip-on device is only permitted if it complies with the legislation of the respective country.
Mounting is carried out at your own risk.
FEATURES
Precision-fit clamping sleeve for mounting on the riflescope Permanent attachment with secure screw connection Integrated protective films to protect the riflescope and improve grip Precise internal contour for exact alignment of the clip-on device Bayonet mount for repeatable installation Made from high-quality aluminium with a hard anodised coating Corrosion- and wear-resistant
SCOPE OF DELIVERY
Clamping sleeve in the selected version Integrated protective films Installation instructions
Available
Präzise Jagen Clamping Sleeve 57,5 mm for mounting a clip-on device on a riflescope
€180.00*
The high-quality clamping sleeve has been specially developed for mounting on the riflescope and offers a stable, repeatable base for attaching a clip-on device.
It is simply slid over the objective of the riflescope – for models up to 61 mm objective diameter over a length of 40 mm, for 30 mm to 38 mm clamping sleeves over 35 mm – and securely screwed into place.
The clamping sleeve remains permanently on the riflescope, enabling quick and precise use of the clip-on device at any time.
The overall diameter is 65 mm at the locking ring for models with objectives up to 61 mm.
Integrated protective films on the contact surfaces ensure secure adhesion and prevent damage to the riflescope – even with powerful calibres, the clamping sleeve is reliably held in position.
Thanks to its precise internal contour and the bayonet mount on the front, it guarantees an absolutely repeatable alignment of the clip-on device every time it is mounted.
Made from a single piece of high-quality aluminium and finished with a hard anodised coating, the clamping sleeve is optimally protected against corrosion and wear – ensuring a long service life even under tough hunting conditions.
Note: The use of a clip-on device is only permitted if it complies with the legislation of the respective country.
Mounting is carried out at your own risk.
FEATURES
Precision-fit clamping sleeve for mounting on the riflescope Permanent attachment with secure screw connection Integrated protective films to protect the riflescope and improve grip Precise internal contour for exact alignment of the clip-on device Bayonet mount for repeatable installation Made from high-quality aluminium with a hard anodised coating Corrosion- and wear-resistant
SCOPE OF DELIVERY
Clamping sleeve in the selected version Integrated protective films Installation instructions
Available
Präzise Jagen Clamping Sleeve 48 mm for mounting a clip-on device on a riflescope
€180.00*
The high-quality clamping sleeve has been specially developed for mounting on the riflescope and offers a stable, repeatable base for attaching a clip-on device.
It is simply slid over the objective of the riflescope – for models up to 61 mm objective diameter over a length of 40 mm, for 30 mm to 38 mm clamping sleeves over 35 mm – and securely screwed into place.
The clamping sleeve remains permanently on the riflescope, enabling quick and precise use of the clip-on device at any time.
The overall diameter is 65 mm at the locking ring for models with objectives up to 61 mm.
Integrated protective films on the contact surfaces ensure secure adhesion and prevent damage to the riflescope – even with powerful calibres, the clamping sleeve is reliably held in position.
Thanks to its precise internal contour and the bayonet mount on the front, it guarantees an absolutely repeatable alignment of the clip-on device every time it is mounted.
Made from a single piece of high-quality aluminium and finished with a hard anodised coating, the clamping sleeve is optimally protected against corrosion and wear – ensuring a long service life even under tough hunting conditions.
Note: The use of a clip-on device is only permitted if it complies with the legislation of the respective country.
Mounting is carried out at your own risk.
FEATURES
Precision-fit clamping sleeve for mounting on the riflescope Permanent attachment with secure screw connection Integrated protective films to protect the riflescope and improve grip Precise internal contour for exact alignment of the clip-on device Bayonet mount for repeatable installation Made from high-quality aluminium with a hard anodised coating Corrosion- and wear-resistant
SCOPE OF DELIVERY
Clamping sleeve in the selected version Integrated protective films Installation instructions
Currently not available
Präzise Jagen Clamping Sleeve 30 mm for mounting a clip-on device on a riflescope
€180.00*
The high-quality clamping sleeve has been specially developed for mounting on the riflescope and offers a stable, repeatable base for attaching a clip-on device.
It is simply slid over the objective of the riflescope – for models up to 61 mm objective diameter over a length of 40 mm, for 30 mm to 38 mm clamping sleeves over 35 mm – and securely screwed into place.
The clamping sleeve remains permanently on the riflescope, enabling quick and precise use of the clip-on device at any time.
The overall diameter is 65 mm at the locking ring for models with objectives up to 61 mm.
Integrated protective films on the contact surfaces ensure secure adhesion and prevent damage to the riflescope – even with powerful calibres, the clamping sleeve is reliably held in position.
Thanks to its precise internal contour and the bayonet mount on the front, it guarantees an absolutely repeatable alignment of the clip-on device every time it is mounted.
Made from a single piece of high-quality aluminium and finished with a hard anodised coating, the clamping sleeve is optimally protected against corrosion and wear – ensuring a long service life even under tough hunting conditions.
Note: The use of a clip-on device is only permitted if it complies with the legislation of the respective country.
Mounting is carried out at your own risk.
FEATURES
Precision-fit clamping sleeve for mounting on the riflescope Permanent attachment with secure screw connection Integrated protective films to protect the riflescope and improve grip Precise internal contour for exact alignment of the clip-on device Bayonet mount for repeatable installation Made from high-quality aluminium with a hard anodised coating Corrosion- and wear-resistant
SCOPE OF DELIVERY
Clamping sleeve in the selected version Integrated protective films Installation instructions
Available
Präzise Jagen Clamping Sleeve 50 mm for mounting a clip-on device on a riflescope
€180.00*
The high-quality clamping sleeve has been specially developed for mounting on the riflescope and offers a stable, repeatable base for attaching a clip-on device.
It is simply slid over the objective of the riflescope – for models up to 61 mm objective diameter over a length of 40 mm, for 30 mm to 38 mm clamping sleeves over 35 mm – and securely screwed into place.
The clamping sleeve remains permanently on the riflescope, enabling quick and precise use of the clip-on device at any time.
The overall diameter is 65 mm at the locking ring for models with objectives up to 61 mm.
Integrated protective films on the contact surfaces ensure secure adhesion and prevent damage to the riflescope – even with powerful calibres, the clamping sleeve is reliably held in position.
Thanks to its precise internal contour and the bayonet mount on the front, it guarantees an absolutely repeatable alignment of the clip-on device every time it is mounted.
Made from a single piece of high-quality aluminium and finished with a hard anodised coating, the clamping sleeve is optimally protected against corrosion and wear – ensuring a long service life even under tough hunting conditions.
Note: The use of a clip-on device is only permitted if it complies with the legislation of the respective country.
Mounting is carried out at your own risk.
FEATURES
Precision-fit clamping sleeve for mounting on the riflescope Permanent attachment with secure screw connection Integrated protective films to protect the riflescope and improve grip Precise internal contour for exact alignment of the clip-on device Bayonet mount for repeatable installation Made from high-quality aluminium with a hard anodised coating Corrosion- and wear-resistant
SCOPE OF DELIVERY
Clamping sleeve in the selected version Integrated protective films Installation instructions
Available
